Flex GE 5 Giraffe sander - 500 W - 225 mm - 230 V

The Flex GE 5 Giraffe Grinder is equipped with electronic control for controlled constant speed, soft-start, overload protection and speed selection with adjustment wheel. Very handy, lightweight machine with optimal ease of use. Provides comfortable and ergonomic working conditions. Easy control: by optimal balance between motor and sanding head. Reliable power transmission and high flexibility thanks to the flexible drive shaft. The "FLEX technology" established for decades. Thanks to this design principle, the weight of the Giraffe head is reduced to a minimum. This makes handling easier. Gimbal-mounted sanding head provides high flexibility and optimal adjustment for sanding walls and ceilings. Efficient dust extraction between the brush ring and sanding pad prevents clogging of the abrasive and promotes a dust-free working environment. Possibility to connect the FLEX safety vacuum cleaners to the FLEX Clip system on the guide tube. Easy handling thanks to the ergonomically shaped aluminium guide tube. An additional handle can be fitted as an option (accessory). Dustproof on/off switch. Highly flexible thanks to an optional 500 mm extension (accessory) for high spaces, can be mounted without tools. According to the sanding paper range ideally suited for sanding plasterboard, solid polystyrene insulation boards, preparation for painting, polishing. Very large areas and rooms with a height of up to 3.20 m can be processed thanks to the optional insert for the GM 320. The innovative textile transport system allows the machine and accessories to be transported effortlessly. The Giraffe does not need to be assembled and is immediately ready for use.